Delta Extrax uses only the strictly necessary ingredients, manufacturing purity, and high-quality products. They use only the best Delta 8, Delta 10, and THC-O.

The Hydro Bubbler for cartridges allows you to enjoy 510 threaded cartridges filled with Delta 8, Delta 10, HHC, or any other type of distillate.

This device comes with the option to adjust the voltage according to the user’s needs, along with indicator lights. It requires a minor assembly to enjoy its great puffs.  

Its design is simple but elegant. Its exterior is transparent and removable, with a glass bubble vapor design. It features power wave technology. 

It is made of an alloy of Zinc, PCTG (food grade), ABS, and Glass.

When you purchase this product from Delta Extrax, you will receive a battery and a micro USB cable. One part of the exterior comes in two colors, black and iridescent rainbow. 

Its size is 57 x 126 x 24 mm, the battery has a capacity of 650 mah, it is suitable for 510 cartridges and fits up to 15 mm diameter cartridge. (Support cartridge resistance ≥ 1.0ohm).

It comes with four voltage settings with LED light indicators and different voltages.

It has four voltage settings that vary the temperature of the device, depending on the color of the LED light indicates the voltage, the higher the voltage, the higher the temperature, thus:

• Blue: 3.2V
• Purple: 3.6V
• Red: 4.0V
• Cycle lights color: 2.2V

Device temperature varies between 2.2V – 4.0V.

Using the Hydro Bubbler is quite simple, just follow the steps below:

• Remove transparent housing and glass bubbler.
• Put water into glass bubbler. Do not exceed 2 cm.
• Screw on the cartridge until snug. Do not over-tighten, be careful!
• Replace transparent housing and glass bubbler.
• Rapidly press the power button 5 times to turn it on or off.
• To change the voltage, turn on the battery and press the power button 3 times. Remember that battery LED indicates voltage.

To clean the nozzle, moisten a cotton swab in alcohol and gently wipe the nozzle. Be sure to clean any residue from the part that connects to the battery and that any residue is completely removed from the mouthpiece and the outside of the cartridge.

Make sure everything is completely dry.

For thorough cleaning, it is suggested to remove the removable parts and soak them in soapy water or alcohol, make sure it is not the cartridge or battery connector, but the glass parts, rinse them with clean water and dry them well.