Weed smokers are engineers. Give us some weed and we will find something to smoke it out of.

While the market for smoking apparatuses is growing more and more each day, making your own smoking device can be a fun and fulfilling activity. First came the mason jar bong, which quickly made many realize that you can make a stellar glass bong out of practically any jar.

So, why not a jam jar?

We present how to make a jam jar bong, brought to you by BestBCBud.

In case you’re still confused, the jam jar bong is well, a bong made from a jam jar. Pretty straightforward.

So, first, you’ll have to either finish that jar of grape jelly that’s been hiding in your fridge for over two years, or pick up a jar of jam from the grocery store and wastefully empty it out. Just kidding. I’m not judging you, I promise.

Next, head to your local hardware store, and pick up the following materials you’ll need for your master-piece.

Here’s what you’ll need:

• A jam jar with a lid
• A wrench socket
• Electrical tape
• A knife (an x-acto knife is probably best for this.)
• Plastic tubing
• A silicone gun for sealing
• A screen

Now we shall move onto the process.

To begin, take your jar and poke two holes that are large enough for the tubing to fit through the lid. Next, you’re going to cut a piece of the tubing and only put it through the hole. Note the ‘only.’

After you’ve placed the tubing through the hole, you’re going to want to seal it off with silicone so that it stays in place. Now you’re going to take the socket and place it on top—you will have to seal this off as well.

When you’re finished putting that together you’re going to need to make a carb (can’t smoke it without a carb, of course!) You can do this by either poking a third hole in the lid or by drilling a hole in the jar. I’d suggest poking a hole unless you already have a drill. If you’ve got a drill, be careful. Maybe you shouldn’t attempt this if you’re already high? Just a suggestion.

Now, you are in the final steps of the process (go you!) First, fill the jar partway with water and then attach the lid on top. Then, place the screen in the socket and that’s it! You’re ready to light it up.

If you’re more of a visual learner and want to check out the video made by BestBCBud on YouTube, or if my directions were confusing because I’m still a little confused myself, you can check out the video below.